If the unit does not have a service port:
Serviceport ipv6 address address/prefix-length To disable DHCP/BootP and manually assign an IPv6 address and (optionally) default gateway, enter:.To disable DHCP/BootP and manually assign an IPv4 address, enter:.To use BootP, change the protocol by entering: serviceport protocol bootp.If your network has a DHCP server, then you need only to connect the switch to your network. To have the address assigned through DHCP:By default, the port is configured as a DHCP client.Depending on whether the unit has a service port, refer to one of the following sections. Using either the web interface or the command line, configure network information as needed.After a successful login, the System Description window opens. By default, the user name is admin, and there is no password.
#Mac terminal emulator 9600 baud password
The user name and password are the same as those you use to log on to the command-line interface. Type the user name and password into the fields on the login screen, then click Login. Open a web browser and enter the IP address of the switch in the browser’s address field.ī.
#Mac terminal emulator 9600 baud series
If you are managing your 210 or 220 series switch with ExtremeCloud, point your browser to /quickstart to get started. Follow these steps to connect your 210 or 220 series switch to the network and perform first-time configuration.īefore you begin, make sure the switch is installed securely and connected to a power supply.
0 kommentar(er)
